Symmetricom TimeProvider 5000 User Manual

458 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Appendix B Specifications and Factory Defaults
Factory Defaults
PTP IOCx-y Multicast Announce
Message Rate (2^y)
1–4 to 4
PTP IOCx-y Multicast Delay
Response Message Rate (2^y)
–7 –7 to 7
Table B-33. NTP Server Parameters
Description Default Value Value Range
NTP IOC1-y State Enable Enable | Disable
NTP IOC1-y TTL Value 64 1 to 255
NTP IOC1-y DSCP State Disable Enable | Disable
NTP IOC1-y DSCP Value 0 0 to 63
NTP IOC1-y Transaction
Rate Limit
20,000
transactions/second
120,000 or 20,000 NTP
transactions/second by license
NTP VLAN ID 2 1 to 4094
Note: The NTP Server feature can either be ordered in a new
system, or added to a previously ordered system as a field upgrade.
Field upgrades require a license activation key. Contact your
Symmetricom representative for more information.
Table B-34. PTP Grand Master Multicast Parameters
Description Default Value Value Range
Active Probe GM IP
IOC
1-1
IOC
1-2
192.168.1.11
192.168.2.11
Valid IPv4 Address
Active Probe VLAN ID No VLAN 1 - 4094
Active Probe GM Clock ID ff:ff:ff:ff:ff:ff:ff:ff 64-bit value
Table B-32. PTP Grand Master Multicast Parameters
Description Default Value Value Range

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English