456 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Appendix B Specifications and Factory Defaults
Factory Defaults
Table B-29. Packet Service Parameters
Description Default Value Value Range
Packet Service ptp-gm for PTP product
ntp-server for NTP product
ptp-gm | ptp-probe | ntp-probe |
ntp-server
Table B-30. PTP Grand Master Common Parameters
Description Default Value Value Range
PTP IOC1-y Timescale Auto Auto | PTP | Arb
PTP IOC1-y Clock Identity MAC-based value
(i.e. FF:FE inserted in the
middle of MAC address)
64-bit value
PTP IOC1-y Priority 1 128 0 to 255
PTP IOC1-y Priority 2 128 0 to 255
PTP IOC1-y Domain 4 for ITU-G.8265.1 profile
0 for all other profiles
0 to 255
PTP IOC1-y TTL Value 64 1 to 255
PTP IOC1-y DSCP State Disable Enable | Disable
PTP IOC1-y DSCP Value 0 0 to 63
PTP Sync Limit –7 –7 to 7
PTP Announce Limit –3 –4 to 4
PTP Delay Limit –7 –7 to 7
PTP State Enable Enable | Disable
PTP Max Number of Clients 500 per port 1 to 500 per port
(or 1000 if bonded ports or
if other port is not running
ptp-gm)
PTP Dither Disable Enable | Disable
PTP Profile Telecom-2008 telecom-2008 | default |
hybrid | itu-g8265-1
PTP Two Step Disable Enable | Disable
PTP MGMT Addr Mode Unicast Unicast | Multicast
PTP Alternate Master Disable Enable | Disable