Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 463
Appendix B Specifications and Factory Defaults
Factory Defaults
TP E30 Expansion Shelf Defaults
Table B-42. TP E30 - E1 Output Port Parameters
Description Default Value Value Range
E1 Output Port x State
x = 1 - 16
Enable Enable | Disable
E1 Output Port x Frame Type
(SMB connector)
freq2048khz CCS | CAS | freq2048khz
E1 Output Port x CRC Disable Enable | Disable
E1 Output Port x SSM Disable Enable | Disable
E1 Output Port x SSM Bit 8 4 | 5 | 6 | 7 | 8
Output Generation 
Warm-up
Squelch Squelch | On | AIS
Output Generation 
Free-run
Squelch Squelch | On | AIS
Output Generation  Holdover On Squelch | On | AIS
Output Generation  Fast-track On Squelch | On | AIS
Table B-43. TP E30 - 1PPS+TOD Output Port Parameters
Description Default Value Value range
1PPS+TOD Output Port State Enable Enable | Disable
1PPS+TOD Output Generation 
Warm-up
Squelch Squelch | On
1PPS+TOD Output Generation 
Free-run
Squelch Squelch | On
1PPS+TOD Output Generation 
Holdover
On Squelch | On
1PPS+TOD Output Generation 
Fast-track
On Squelch | On

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English