Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 271
Chapter 4 Provisioning
This chapter describes the procedures for provisioning the TimeProvider 5000. Use
the procedures in this chapter after you have installed and powered up the
TimeProvider 5000 (see Chapter 2, Installing).
In This Chapter
 Establishing a Connection to the TimeProvider 5000
 Managing the User Access List
 Provisioning the TP5000 for Login Authentication
 Provisioning IMC Ethernet Port
 Provisioning IOC Ethernet Ports
– Redundant Ethernet Ports
– Independent Ethernet Ports
– Ethernet Auto-Negotiation
 Provisioning VLAN
 Provisioning PTP
 Provisioning NTP
 Provisioning the Input Reference
– Setting GPS Port as Reference
– Setting GNSS Port as Reference
– Setting an E1/T1 Input as Reference
– Setting a 1PPS+TOD Input as Reference
 Provisioning the Programmable E1/T1 Inputs
 Provisioning the 1PPS+TOD Inputs
 Provisioning the Programmable E1/T1 Outputs
 Provisioning the Dedicated Outputs
 Provisioning the 10MHz & 1PPS Outputs
 Setting the System Date and Time
 Provisioning Alarms
 Saving and Restoring Provisioning Data
 Provisioning for SNMP
Provisioning for Expansion Shelves
 Provisioning TP 5000 for Expansion Shelf
 Provisioning Expansion Shelf E1 / 1PPS+TOD Outputs
 Provisioning Expansion Shelf PTP/SyncE Outputs

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English