Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 453
Appendix B Specifications and Factory Defaults
Factory Defaults
Table B-22. I/O Card Expansion Port Output Parameters
Description Default Value Value Range
I/O Exp. Port 1 - DTI Output .State Enable Enable | Disable
I/O Exp. Port 2 - DTI Output State Enable Enable | Disable
Table B-23. Telecom Output Port Parameters
Description Default Value Value Range
Telecom Output Port State Enable Enable | Disable
Telecom Output Port Frame
Type (mini-BNC connector)
freq2048khz CCS | CAS | freq2048khz
Telecom Output Port Frame
Type (RJ-45 connector)
freq2048khz D4 | ESF | freq1544khz
Telecom Output Port CRC Disable Enable | Disable
Telecom Output Port SSM Disable Enable | Disable
Telecom Output Port SSM Bit 8 4 | 5 | 6 | 7 | 8
Output Generation 
Warm-up
Squelch Squelch | On | AIS
Output Generation 
Free-run
Squelch Squelch | On | AIS
Output Generation  Holdover On Squelch | On | AIS
Output Generation 
Fast-track
On Squelch | On | AIS
Table B-24. Output Port Parameters
Description Default Value Value range
10 MHz Output Port State Enable Enable | Disable
10 MHz Output Generation 
Warm-up
Squelch Squelch | On
10 MHz Output Generation 
Free-run
Squelch Squelch | On
10 MHz Output Generation 
Holdover
On Squelch | On
10 MHz Output Generation 
Fast-track
On Squelch | On

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English