Symmetricom TimeProvider 5000 User Manual

340 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 4 Provisioning
Provisioning Expansion Shelf E1 / 1PPS+TOD Outputs
3. Type set output-exp pps-tod state exp1 all enable and press Enter.
Output Generation Behavior
Output generation behavior can be configured independently for individual ports or
the same behavior can be configured for all 1PPS+TOD ports on the specified
expansion shelf.
1. Login at the Admin or Config-user level.
2. Type
set output-exp pps-tod warm-up exp0 all squelch and press Enter.
3. Type
set output-exp pps-tod free-run exp0 port 7 squelch and press
Enter.
4. Type
set output-exp pps-tod holdover exp0 all on and press Enter.
5. Type
set output-exp pps-tod fast-track exp0 port 5 squelch and
press Enter.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English