Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 451
Appendix B Specifications and Factory Defaults
Factory Defaults
GNSS Position Lat -
N37:22:43.425
Long -
W121:55:34.815
Elevation - 13.7m
LAT = Ndd:mm:ss.ss or
Sdd:mm:ss.sss
LONG = Eddd:mm:ss.ss or
Wddd:mm:ss.sss
ELEV= ±hhhh.h height in meters,
-999.9 to 40,000.0 meters
GNSS Elevation Mask 10 5 to 45 degrees
GNSS Track Mode Priority-GPS Beidou | GPS | Priority-GPS
| Priority Beidou
GNSS PQL State Disable Enable | Disable
GNSS PQL Value 1 1 to 3
1PPS+TOD Input Port 1 State Enable Enable | Disable
1PPS+TOD Input Port 1 Priority 3 1 - 16
1PPS+TOD Input Port 1
PQL State
Disable Enable | Disable
1PPS+TOD Input Port 1
PQL Value
1 1 to 3
1PPS+TOD Input Port 1 Cable
Delay
0 0 - 200,000 ns
1PPS+TOD Input Port 2 State Enable Enable | Disable
1PPS+TOD Input Port 2 Priority 4 1 - 16
1PPS+TOD Input Port 2
PQL State
Disable Enable | Disable
1PPS+TOD Input Port 2
PQL Value
1 1 to 3
1PPS+TOD Input Port 2 Cable
Delay
0 0 - 200,000 ns
Reference Criteria Priority Priority | SSM
(see note below)
Telecom Input Port 1 State Enable Enable | Disable
Telecom Input Port 1 Priority 7 1 - 16
Telecom Input Port 1 Frame
Type
freq2048khz D4 | ESF | CCS | CAS |
freq2048khz | freq1544khz
Telecom Input Port 1 CRC Disable Enable | Disable
Telecom Input Port 1 SSM
State
Disable Enable | Disable
(see note below)
Table B-20. GPS, GNSS, and Input Port Parameters (Continued)
Description Default Value Value Range

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English