Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 145
Chapter 3
TimeProvider 5000 CLI Command Set
show image
This command displays the firmware image used by each module in the system and
the firmware version.
Command Syntax:
show image
Example:
tp5000> show image
Response:
IMC IMAGE DETAILS
Active image: 2 1.0.4_200811040901
Backup image: 1 1.0.2_200810231325
Next boot image: 2
IOC1 IMAGE DETAILS
Active image: 2 1.0.4_200811040858
Backup image: 1 1.0.2_200810231322
Next boot image: 2
IOC2 IMAGE DETAILS
Active image: 2 1.0.4_200811040858
Backup image: 1 1.0.4_200811040858
Next boot image: 2
Exp0 IMAGE DETAILS
Active image: 2 1.0.4_200811040901
Backup image: 1 1.0.2_200810231325
Next boot image: 2
Exp4 IMAGE DETAILS
Active image: 2 1.0.4_200811040901
Backup image: 1 1.0.2_200810231325
Next boot image: 2
. . .
Exp8 IMAGE DETAILS
Active image: 2 1.0.4_200811040901
Backup image: 1 1.0.2_200810231325
Next boot image: 2

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English