Symmetricom TimeProvider 5000 User Manual

134 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
set gnss mask <mask-value>
 To set the GNSS cable-delay value
set gnss cable-delay <delay-value>
 To set the forced PQL state for the GNSS port
set gnss pql-state {enable | disable}
 To set the forced PQL value for the GNSS port
set gnss pql-value <pql-value>
Range: Height: -999.9 to 18000.0 meters
Mask: 5 to 45 degrees
Cable Delay: 0 to 65485 nanoseconds
Priority: 1 to 16, where 1 is highest priority and 16 is lowest
PQL Value: 1 to 3
Default: Mask: 10 degrees
Cable Delay: 0 nanoseconds
PQL State: Disable
PQL Value: 1
Example 1:
To set GNSS to auto mode 

tp5000>set gnss mode auto
Example 2:
To manually set the GNSS to manual mode, with a system position of latitude of
N37:22:45.123, longitude of W121:55:36.123, and a height 17.5 meters
tp5000>set gnss mode manual latitude N37:22:45.123 longitude
W121:55:36.123 height 17.5
Example 3:
To enable GNSS on the GNSS port 

tp5000>set gnss state enable
Example 4:
To set GNSS priority on the GNSS port to a value of 3 

tp5000>set gnss priority 3

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English