Symmetricom TimeProvider 5000 User Manual

228 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
set ptp-probe ioc1-[y] active-probe duration <dur-value>
Example 1:
For a Grandmaster Clock ID of 00:B0:AE:FF:FE:00:00:06, Grandmaster IP address
of 192.168.1.11, and probe VLAN ID of 35:
tp5000>set ptp-probe ioc1-1 active-probe gm-clock-id
00:B0:AE:FF:FE:00:00:06 gm-ip 192.168.1.11 vlan-id 35
For a Grandmaster Clock ID of 00:B0:AE:FF:FE:00:00:06, GrandmasterIP address
of 192.168.1.11, and no VLAN:
tp5000> set ptp-probe ioc1-1 active-probe gm-clock-id
00:B0:AE:FF:FE:00:00:06 gm-ip 192.168.1.11 <enter>
Example 2:
For an interval of 0.25 seconds ( -2 ) on Port 1 of IOC1:
tp5000> set ptp-probe ioc1-1 active-probe interval -2
Example 3:
For a duration of 500 seconds on Port 1 of IOC1:
tp5000> set ptp-probe ioc1-1 active-probe duration 500
Level : Config and Admin only

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English