Symmetricom TimeProvider 5000 User Manual

240 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
Response 2:
--------------------------------------------------------------------------
|Index|User Name |User Type |Auth. Key |Priv. Key |
|-----|--------------------|-------------|---------------|---------------|
|1 |test |snmpnoauth |********** |********** |
|.....|....................|.............|...............|...............|
|2 |harsha |snmpshades |********** |********** |
--------------------------------------------------------------------------
Example 3:
tp5000> show snmp trapuser
Response 3:
No SNMP trap user configured.
Example 4:
tp5000> show snmp v2-community
Response 4:
-----------------------------------------
|Index|Community Name |Access Level|
|-----|--------------------|------------|
|1 |test |readwrite |
|.....|....................|............|
|2 |testteam |readwrite |
-----------------------------------------
Example 5:
tp5000> show snmp trapversion
Response 5:
Trap version - v2c
Example 6:
tp5000> show snmp state-v2
Response 6:
SNMP v2 state - enable
Example 7:
tp5000> show snmp trap-mib
Response 7:
SNMP Trap MIB Version - 2.0

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English