Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 323
Chapter 4 Provisioning
Provisioning the Programmable E1/T1 Inputs
3. Type set input frametype port1 freq1544khz and press Enter.
4. Type
set input ssm port1 disable and press Enter.
5. Type
set input priority port1 1 and press Enter.
6. Type
set input state port1 enable and press Enter.
D4 Frame Type
To provision Port 2 as an input port with a frametype of D4, SSM disabled, a Priority
value of 2, and to enable the port:
1. Login at the Admin or Config-user level.
2. Type
set io port2 input and press Enter.
3. Type
set input frametype port2 d4 and press Enter.
4. Type
set input ssm port2 disable and press Enter.
5. Type
set input priority port2 2 and press Enter.
6. Type
set input state port2 enable and press Enter.
ESF Frame Type
To provision Port 2 as an input port with a frametype of ESF, SSM enabled, Priority
value of 1, and to enable the port:
1. Login at the Admin or Config-user level.
2. Type
set io port2 input and press Enter.
3. Type
set input frametype port2 esf and press Enter.
4. Type
set input ssm port2 enable and press Enter.
5. Type
set input priority port2 1 and press Enter.
6. Type
set input state port2 enable and press Enter.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English