Symmetricom TimeProvider 5000 User Manual

436 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Appendix B Specifications and Factory Defaults
Specifications
11 U1 1PPS Status 
0x00 = normal
0x01 = Time sync equipment
(atomic clock)
in holdover mode)
0x02 = do not use
0x03 = Time sync equipment
(high-stability crystal clock)
in holdover mode)
0x04 = Transport carrier equipment in
holdover mode)
Other values are reserved
12 U1 TAcc  PPS jitter category (0  255):
0 = 0 ns
1 = 15 ns
2 =
30 ns
3 = 45 ns
.
.
.
.
255 =not defined
Note: This value is fixed to 255 for
transmission and base station
equipment
13 U1 Reserved  Reserved
14 U1 Reserved  Reserved
15 U1 Reserved  Reserved
Table B-9. TP 5000 - Time Information Message Payload Contents for 1PPS+TOD Input (Continued)
Byte
Offset
Data
Type
Name Units Notes

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English