YASKAWA YRC1000 - Page 474

13 External Memory Device
13.2 Handling Data
13-5
HW1485509
HW1485509
Table 13-1: Data List (Sheet 1 of 4)
Data Classification File name
(Saved Data)
Save Load
OPN EDT MNG SFT OPN EDT MNG SFT
6. SYSTEM BACKUP (CMOS.BIN) CMOS.BIN        
1. JOB Single job JOBNAME.JBI        
2. GENER
AL DATA
Tool data
1)
TOOL.CND        
User coordinate
data
UFRAME.CND        
Zone setting data CUBEINTF.CND        
Variable data VAR.DAT        
Timer variable
data
TMVAR.DAT        
Shock detection
level data
SHOCKLVL.CND        
Interrupt job
1)
INTJOB.DAT        
Tool interfere
data
1)
TOOLINTF.DAT        
Axis range limit
data
1)
AXRNGLMT.DAT        
Axis speed
monitor data
1)
AXSPDMON.DAT        
Robot range limit
data
1)
RBRNGLMT.DAT        
Speed limit data
1)
SPDLMT.DAT        
Tool angle monitor
data
1)
TLANGMON.DAT        
Tool change
monitor data
1)
TLCHGMON.DAT        
External force
monitor data
1)
PFLFLMT.DAT        
Approval warning
buzzer data
1)
APPRBUZR.DAT        
User menu data USERMENU.DAT        
Job registration
data
JET.DAT        
1) Safety level is required to load for FSU supporting manipulators
2) Software Pendant is required to load
: Can be done, : Cannot be done
OPN: Operation level, EDT: Edit level,
MNG: Management level, SFT: Safety level
474 of 493