R3765/67G Series Network Analyzer Operation Manual
5.2 Transmission/Reflection Characteristic Measurement (Four Screen Display Mode)
5-23
Select S21 for channel 4.
[MEAS] {SUB MEAS ON/OFF} {S21 TRANS FWD}
Active channel is switched to 4 and the format is set with logarithmic magnitude &
group delay.
[FORMAT] {LOG MAG & DELAY}
Each time [CH 2] is pressed, the active channel is switched between channel 2 and
channel 4.
Adjust the scale.
[SCALE] {AUTO SCALE} {TRACE 2nd/1st} {AUTO SCALE}
The display on the screen is as follows.
Figure 5-21 4 Screen Display (Split Display of Channel 2 and 4)
Note: OPT11 or OPT14 uses a different [MEAS] menu.
For more information, refer to the description on page 7-10.
5
Switch ON.
To Next Page
Loading...
