ADVANTEST R3765G Series User Manual

R3765/67G Series Network Analyzer Operation Manual
6.3 Saving to the Floppy Disk
6-7
6.3 Saving to the Floppy Disk
Here describes how to save/recall the setting of the measurement using the store/load-file.
In the store/load-file, the data is stored in the floppy disk inserted in A drive.
CAUTION!
1. Have a formatted floppy disk ready.
2. The usable disks are DD720KB, HD1.2MB, HD1.44MB.
(1) Formatting procedure of floppy disk
Insert floppy disk into floppy disk drive.
Format types in the initial state are ;
2HD 1.44MB
Format.
[SAVE] {FORMAT DISK} {OK?}
(2) Saving to the floppy disk
Display markers, etc. and set the measurement screen to save.
Insert the formatted floppy disk into A drive and select the store file menu.
After floppy disk inserted,
[SAVE] {STORE FILE}
Now the file list window is displayed.
Select a data to store.
The setting conditions, raw data before formatted and calibration data are stored here.
{DEFINE STORE}
{STATE ON/OFF}
{RAW ARRAY ON/OFF}
{CORR COEF ON/OFF} When the calibration was performed, switches ON
automatically.
{Return}
Set a name to a file before saving the data to retrieve easily.
If it’s saved under the default file name, see step .
{EDIT NAME}
{CLEAR NAME}
1
2
1
2
3
Switch ON.
4
5

ADVANTEST R3765G Series Specifications

General

Brand	ADVANTEST
Model	R3765G Series
Category	Measuring Instruments
Language	English