R3765/67G Series Network Analyzer Operation Manual
3.6 Measurement Samples of Simple Reflection Characteristics
3-26
Measurement of reflection coefficient (LIN MAG format setting)
The following operation is performed to display the return loss converted into reflection
coefficient.
[FORMAT] {LIN MAG}
Note: If the format soft menu has already been displayed, it’s not necessary to press
[FORMAT]
.
The top of the screen corresponds to reflection coefficient 1 (full reflection), and the
bottom corresponds to reflection coefficient 0. The display becomes linear scale.
[SCALE] {AUTO SCALE}
The display on the screen is as follows.
Figure 3-23 Reflection Coefficient Measurement
2
To Next Page
Loading...
