R3765/67G Series Network Analyzer Operation Manual
5.1 Measurement of Transmission Characteristic (2 Trace Display)
5-4
• By converting the format as follows, the measured results can be two-trace-overlap-
displayed.
Logarithmic magnitude/group delay measurement
Set the format to logarithmic magnitude (the first trace)/group delay (the second trace)
measurement.
[FORMAT] {More 1/2} {LOG MAG & DELAY}
The scale can be changed in the same way as & .
[SCALE] {AUTO SCALE}
{TRACE 2nd/1st} {AUTO SCALE}
The display on the screen is as follows.
Figure 5-3 Logarithmic Magnitude/Group Delay Measurement
(Overlap Display)
6
4 5
To Next Page
Loading...
