R3765/67G Series Network Analyzer Operation Manual
1.3 Option, Accessory and Recommended Kit (Extra-cost)
1-3
1.3 Option, Accessory and Recommended Kit (Extra-cost)
(1) Option
NOTE: OPT11 and OPT12, OPT13 or OPT14 cannot be installed concurrently.
OPT12 and OPT13, OPT14, OPT71 or OPT72 cannot be installed concurrently.
OPT13 and OPT14, OPT71, or OPT72 cannot be installed concurrently.
Name
Option
Remarks
OPT
10
OPT
11
OPT
12
OPT
13
OPT
14
OPT
70
OPT
71
OPT
72
R3765AG 3.8 GHz without
the built-in test set
R3765BG 3.8 GHz with the
built-in bridge
R3765CG 3.8 GHz with the
built-in test set
R3767AG 8 GHz without the
built-in test set
R3767BG 8 GHz with the
built-in bridge
R3767CG 8 GHz with the
built-in test set
Option
OPT10 Output attenuator (electronic-type)
OPT11 Built-in 3-port test set
OPT12 Impedance : 75Ω
OPT13 Impedance : 75Ω , Built-in 3-port test set
OPT14 Built-in 4-port test set
OPT70 Time domain balance (Software)
OPT71 Software Fixture to measure balancing (Software)
OPT72 Software fixture single (Software)