R3765/67G Series Network Analyzer Operation Manual
5.1 Measurement of Transmission Characteristic (2 Trace Display)
5-7
Display two screens simultaneously.
[DISPLAY] {DUAL CH ON/OFF} {SPLIT CH ON/OFF}
In two screens display, the operation of format or scale, etc. is performed to the active
channel independently. The display of active channel becomes inverted one and the
frame of the screen display changes to white.
Set channel 2 to the phase display.
[FORMAT] {PHASE}
This corresponds to the logarithmic magnitude/phase measurement (overlap display)
of sub-section 5.1.1.
Figure 5-5 Logarithmic Magnitude/Phase Measurement (Split Display)
5
6
To Next Page
Loading...
