R3765/67G Series Network Analyzer Operation Manual
1.1 Product Description
1-1
1 GETTING STARTED
This chapter gives a brief explanation of product, its working environment and operational
precautions. Read this chapter before you use the product.
1.1 Product Description
R3765/67G series is the 3.8GHz/8GHz vector network analyzer, which has newly been designed
based on a concept “an optimum tool for each application”.
We have fully pursued high throughput such as 0.15ms/points high-speed measurement at a
resolution bandwidth (RBW) of 20kHz, 100dB wide dynamic-range measurement, and two-device
simultaneous measurement with four-channel/eight-trace display.
Also, we have added the program sweeping function that can freely change the resolution
bandwidth (RBW) and output level during sweep operation for each segment.
With the built-in BASIC controller, a high-speed ATE system can be easily configured with no
external controller for processes from adjustment to inspection.
<Features>
(1) High throughput
• For the C type, four S parameters can be displayed simultaneously using a high-speed
frequency sweep of 0.15 ms/point and the 4ch/8 trace.
(2) Wide dynamic range
• 100dB wide dynamic range.
(3) Program sweeping function.
• For each segment, allows setting of frequency, output level, RBW and settling time.
(4) MS-DOS formatted disk
• By using an MS-DOS personal computer, it is possible to easily create programs and
analyze data because of the disk conformed to MS-DOS format standard.
• Three modes of storage capacity available (DD 720KB, HD 1.2MB, HD 1.4MB).
To Next Page
Loading...
Need help?
General
