R3765/67G Series Network Analyzer Operation Manual
7.14 Save/Recall
7-143
{RENAME REG} : Calls the name editing menu used to define a register
name. (Refer to sub-section 7.14.4.)
• Save register menu (2 of 4)
{SAVE REG-6} : Saves the settings, calibration data and memory trace
data into the register 6.
{SAVE REG-7} : Saves the settings, calibration data and memory trace
data into the register 7.
{SAVE REG-8} : Saves the settings, calibration data and memory trace
data into the register 8.
{SAVE REG-9} : Saves the settings, calibration data and memory trace
data into the register 9.
{SAVE REG-10} : Saves the settings, calibration data and memory trace
data into the register 10.
{RENAME REG} : Calls the name editing menu used to define a register
name. (Refer to sub-section 7.14.4.)
• Save register menu (3 of 4)
{SAVE REG-11} : Saves the settings, calibration data and memory trace data
into the register 11.
{SAVE REG-12} : Saves the settings, calibration data and memory trace data
into the register 12.
{SAVE REG-13} : Saves the settings, calibration data and memory trace data
into the register 13.
{SAVE REG-14} : Saves the settings, calibration data and memory trace data
into the register 14.
{SAVE REG-15} : Saves the settings, calibration data and memory trace data
into the register 15.
{RENAME REG} : Calls the name editing menu used to define a register
name. (See sub-section 7.14.4.)
• Save register menu (4 of 4)
{SAVE REG-16} : Saves the settings, calibration data and memory trace data
into the register 16.
{SAVE REG-17} : Saves the settings, calibration data and memory trace data
into the register 17.
{SAVE REG-18} : Saves the settings, calibration data and memory trace data
into the register 18.
{SAVE REG-19} : Saves the settings, calibration data and memory trace data
into the register 19.
{SAVE REG-20} : Saves the settings, calibration data and memory trace data
into the register 20.
{RENAME REG} : Calls the name editing menu used to define a register
name. (See sub-section 7.14.4.)