ADVANTEST R3765G Series User Manual

R3765/67G Series Network Analyzer Operation Manual
7.15 Hard Copy
7-157
{DEFAULT SETUPS} : See section 7.15.4. (This menu is for the printer. This
menu is not used at printer setup.)
{PLOTTER} : See section 7.15.4. (This menu is for the printer. This
menu is not used at printer setup.)
Printer setup menu
{DPI} : Sets the print resolution.
{UPPER MARGIN} : Sets the upper margin in millimeters.
{LEFT MARGIN} : Sets the left margin in millimeters.
{ZOOM SCALE} : Specifies the enlargement ratio. Select it from either
one, two or three times.
{LANDSCAPE ON/OFF} : Specifies the print direction (vertical or horizontal
writings).
{FORMFEED ON/OFF} : Toggles the formfeed ON or OFF.
{PRINTER} : Calls the printer menu. (See step .)
Printer menu
{ESC/P J84} : Selects a printer which supports the printer control
code EPSON ESC/P J83 or J84 of the Seiko-Epson's
24-dot printer.
{ESC/P V.2} : Selects a printer which supports the printer control
code EPSON ESC/P V.2 used for the Seiko-Epson’s
24/48-dot printer. If a printer which supports only the
raster mode is used, select this menu.
{PCL} : Selects a printer (compatible with LaserJet 5L) which
supports the Hewlett Packard printer control code PCL.
{PRINT COLOR ON/OFF} : Selects the color or monochrome output mode.
4
5
5

ADVANTEST R3765G Series Specifications

General

Brand	ADVANTEST
Model	R3765G Series
Category	Measuring Instruments
Language	English