Avaya 4526FX - Page 197

LLDP port dot3 tlvs
Port MacPhy
ConfigStatus
MdiPower
Support
Link
Aggregation
MaxFrameSize
1 true true true true
13 true true true true
Enabling all LLDP MED TLVs for transmission on the router and IP Phone
ports
The first three commands are required to configure the location identification for the LLDP-
MED Location Identification
TL
V.
4550T (config-if)#lldp location-identification civic-address
country-code US city Boston street Orlando
4550T (config-if)#lldp location-identification coordinate-base
altitude 234 meters datum WGS84
4550T (config-if)#lldp location-identification ecs-elin 1234567890
4550T (config-if)#lldp tx-tlv med port 12,13 med-capabilities
4550T (config-if)#lldp tx-tlv med port 12,13 network-policy
4550T (config-if)#lldp tx-tlv med port 12,13 location
4550T (config-if)#lldp tx-tlv med port 12,13 extendedPSE
4550T (config-if)#lldp tx-tlv med port 12,13 inventory
Checking the new LLDP settings of the router and IP Phone ports
The following represents screen output for the show lldp tx-tlv med command:
4550T (config-if)#show lldp tx-tlv med
LLDP port med tlvs
Port Med
Capabiliti
es
Network
Policy
Location Extended
PSE
Inventory
12 true true true true true
13 true true true true true
MED TLVs are transmitted only if Med-Capabilities TLV is transmitted
Configuring LLDP using ACLI
Configuration — System April 2011 197