Avaya 4526FX - Page 196

Enabling all LLDP DOT1 TLVs for transmission on the router and IP Phone
ports
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot1 port-vlan-id
4548GT-PWR(config-if)#
lldp tx-tlv port 1/13 dot1 port-protocol-vlan-
id
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot1 vlan-name
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot1 protocol-identity
EAP LLDP STP
Checking the LLDP settings of the router and IP Phone ports
The following represents screen output for the show lldp port 1/13 tx-tlv dot1
command:
4548GT-PWR(config-if)#show lldp port 1/13 tx-tlv dot1
LLDP dot1 port tlvs
Dot1 protocols: STP,EAP,LLDP
Port PortVlanId VlanNameList PortProtocol
VlanId
Protocol
Identity
13 true 1,3,5,7,9,11
7-118
1,3,5,7,9,117
-118
EAP,LLDP
Enabling all LLDP DOT3 TLVs for transmission on the router and IP Phone
ports
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot3 mac-phy-config-
status
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot3 mdi-power-support
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot3 link-aggregation
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot3 maximum-frame-size
Checking the LLDP settings of the router and IP Phone ports
The following represents screen output for the show lldp port 1/13 tx-tlv dot3
command:
4548GT-PWR(config-if)#show lldp port 1/13 tx-tlv dot3
System configuration using ACLI
196 Configuration — System April 2011