Avaya 4526FX - Page 270

Variable Value
• 1—inversed
• 2—normal
•
3—invalid
Pair1Swap Indicates the status of the pin assignments
for the first pair in the cable. Values include:
• 1—normal
• 2—swapped
• 3—invalid
• 4—error
Pair1Skew Indicates the differential length, in meters, of
the first pair in the cable. The skew
measurement can be performed only when
the cable gigabit link is up, regardless of
traf
fic activity. A value of –1 means an error
occurred with the length measurement.
Pair2Polarity Indicates the polarity of the second pair in the
cable. This capability is available only when
the cable gigabit link is up, regardless of
traf
fic activity. Values include:
• 1—inversed
• 2—normal
• 3—invalid
Pair2Swap Indicates the status of the pin assignments
for the second pair in the cable. Values
include:
• 1—normal
• 2—swapped
• 3—invalid
• 4—error
Pair2Skew Indicates the differential length, in meters, of
the second pair in the cable. The skew
measurement can be performed only when
the cable gigabit link is up, regardless of
traffic activity. A value of –1 means an error
occurred with the length measurement.
Pair3Polarity Indicates the polarity of the third pair in the
cable. This capability is available only when
the cable gigabit link is up, regardless of
traffic activity. Values include:
System configuration using Enterprise Device Manager
270 Configuration — System April 2011