Avaya 4526FX - Page 359

Setting Factory default configuration value
Speed/Duplex (Refer to Autonegotiation)
Trunk 1–8(depending on configuration status)
Trunk Members (Unit/Port) Blank field
STP Learning Normal
Trunk Mode Basic
Trunk Status Disabled
Trunk Name Trunk #1 to Trunk #8
Traffic Type Rx and Tx
Monitoring Mode Disabled
Rate Limit Packet Type Both
Limit None
Snooping Disabled
Proxy Disabled
Robust Value 2
Query Time 125 seconds
Set Router Ports Version 1
Static Router Ports - (for all ports)
Console Port Speed 9600 baud
Console Switch Password None
Telnet/Web Stack Password None
Console Read-Only Switch
Password
user
Console Read/Write Switch
Password
Passwords are user/secure for non-SSH SW images and
userpasswd/securepasswd for SSH SW images.
Console Read-Only Stack
Password
user
Console Read/Write Stack
Password
secure
Radius password/server secret
New Unit Number Current stack order
Group 1
Bridge Priority 8000
Bridge Hello Time 2 seconds
Factory default configuration
Configuration — System April 2011 359