Avaya 4526FX - Page 360

Setting Factory default configuration value
Bridge Maximum Age Time 20 seconds
Bridge Forward Delay 15 seconds
Add VLAN Membership 1
Tagged BPDU on tagged port STP Group 1--No Other STP Groups--Yes
STP Group State STP Group 1--Active Other STP Groups--InActive
VID used for tagged BPDU 4001-4008 for STGs 1-8, respectively
STP Group 1
Participation Normal Learning
Priority 128
Path Cost 1
TELNET Access/SNMP/Web By default, SNMP access is disabled in the SSH image and
enabled in the non-SSH image. T
elnet and Web are
enabled by default in both SSH and non-SSH images.
Use list: Yes
Login Timeout 1 minute
Login Retries 3
Inactivity Timeout 15 minutes
Event Logging All
Allowed Source IP Address
(50 user-configurable fields)
Entry 51: ::/0 Entry 52: ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff/128 Entry
53: ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff/128
…………………………………………………………….
Entry 100: ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff/128
Remaining 49 fields: 255.255.255.255 (any address is
allowed)
Allowed Source Mask(50 user-
configurable fields)
First field: 0.0.0.0 (no IP address assigned)
Remaining 49 fields: 255.255.255.255 (any address is
allowed)
Image Filename Zero-length string
Diagnostics image filename Zero-length string
TFTP Server IP Address 0.0.0.0 (no IP address assigned)
Start TFTP Load of New Image No
Configuration Image Filename Zero-length string
Copy Configuration Image to
Server
No
Configuration reference
360 Configuration — System April 2011