Avaya 4526FX - Page 89

Table 23: Config {network | usb} command parameters on page 89 outlines the parameters
for this command.
T
able 23: Config {network | usb} command parameters
Parameter Description
network Retrieve the configuration from a TFTP
server.
<A.B.C.D> The IP
address of the TFTP server.
usb Retrieve the configuration from an USB
mass storage device.
<1-8> The unit number in which the USB device is
inserted in, if the unit is a part of the stack.
<filename> The name of the file to be retrieved.
script command
Use the script command to restore an entry (either a TFTP
or an USB entry) in the ASCII
configuration script table.
Important:
When you use the TFTP
address parameter to perform copy or download commands, the
system overwrites the TFTP server address
The syntax for the script command is:
script <1-127> {usb [unit<1-8>] <filename> | tftp <hostname | IP>
<filename>}
The script command is executed in the Privileged EXEC command mode.
Table 24: script parameters
Parameters Description
<1-127> The index of the entry to be restored.
usb Restores an USB entry.
<1-8> The unit number in which the USB device is
inserted in, if the unit is a part of the stack.
tftp Restores a TFTP entry.
<hostname | ip> The hostname or IP address of the TFTP
server.
filename The name of the file to be restored.
Configuration files in ACLI
Configuration — System April 2011 89