11. Make sure the width of the loaded roll is displayed in BRoll Width —in this case, ISO A3/A4 (297.0mm).
Note
• If
the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer In-
formation on the Main pane to update the printer information.
12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes
dialog box—in this case, ISO A4.
13. Select the JPrint Centered check box.
14. Confirm the print settings, and then click MPrint to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Mac OS X) →P.407 "
Enhanced Printing Options
>
Centering originals
>
iPF825 Printing Originals Centered on Rolls (Mac OS X)
3
151
To Next Page
Loading...
