Canon iPF825 - Page 623

Cutting Method Menu Settings Driver Setting
Paper
Cut-
ting
→P.610
Auto Cut
Choose this option if you want to cut pages by
pressing Cutter Unit buttons for manual cut-
ting after printing when the printer driver is
configured to Auto Cut > No or Print Cut
Guideline.
Otherwise choose this option if you want to
cut the roll edge after loading a roll.
Paper
Cutting
Yes No Print
Cut
Guideline
Note
• Automatic and Eject are valid only when you have specified Auto Cut > Yes in the printer driver.
• With
Eject, printing does not resume after a series of jobs have been printed continuously until the roll is
cut.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
Important
• When
cutting wide printed documents after ejection, have two people support the documents. If the pa-
per drops, printed documents may be damaged.
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the
printing quality.
1. Press the Menu button to display MAIN MENU.
2. Press ▲ or ▼ to select Paper Details, and then press the ▶ button.
3. Press ▲ or ▼ to select the type of paper, and then press the ▶ button.
4. Press ▲ or ▼ to select Cutting Mode, and then press the ▶ button.
Handling Paper
> Handling rolls >
iPF825 Specifying the Cutting Method for Rolls
7
607