First Level
Second
Level
Third Lev-
el
Fourth
Level
Fifth Level
Sixth Lev-
el
Seventh
Level
Eighth Level
System
Setup
Save:
Shared
Box
(*13
→P.678
)
On *
Show Job
Log
(*13
→P.678
)
Off
On *
Admin.
Menu
(*13
→P.678
)
Change Password (*14 →P.678 )
Init.Admin.Pswd (*14 →P.678 )
Test Print Status
Print
No
Yes
Paper De-
tails
No
Yes
Print Job
Log
No
Yes
Menu
Map
No
Yes
Nozzle
Check
No
Yes
Color Pa-
lette
No
Yes
Informa-
tion
System Info
Error Log 1:xxxxxxxx-xxxx
2:xxxxxxxx-xxxx
*1: Available only if a roll is loaded.
*2: Available only if ManageRemainRoll is On.
*3: Available if Feed Priority is Automatic or Print Length.
*4: Not displayed if IP Mode is Manual.
*5: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types
of Paper.")
→P.578 The paper type setting in the printer driver and related software (as well as on the Con-
trol Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you change
paper information by using the Media Configuration Tool.See the Media Configuration Tool →P.385 or
Media Configuration Tool →P.508 .
*6: Not displayed if NetWare is Off.
*7: Not displayed if Auto Detect is On.
*8: Follows the setting in Date Format.
*9: Available after you have used Advanced Adj. in Auto Head Adj. once.
*10: Not displayed if IP Mode is Automatic.
*11: Follows the setting in Length Unit.
*12: Leading edge is not available as a setting option in the Paper Detailed Settings dialog box of the printer
driver.
Printer Parts
>
Control Panel
>
iPF825 Menu Structure
9
677
To Next Page
Loading...
