14. Press the Power button and turn off the printer.
Important
• Turn
off the printer before you unplug it. It may damage the printer if you unplug it before it is
off and transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the
Ink Tank, wait until the printer comes online, and follow this procedure again.
15. Disconnect the printer power cord and interface cable, as well as the Roll Unit power cord.
16. Open
the Top Cover, grasp the Belt, insert it between the Belt Stopper, and affix the Belt Stopper with a hex
screw at the position indicated.
Maintenance
>
Other Maintenance
>
Preparing to Transfer the Printer iPF825
11
780
To Next Page
Loading...
