EnerSys Alpha Cordex CXC HP User Manual

Cordex®CXCHPControllerSoftwareManual|20-Maintainingthecontroller
20.5.6. Configuration restore points
TheConfigurationRestorePointfeaturewillautomaticallycapturetheconfigurationofthecontrollerdaily
(ifanythinghaschanged),providingautomaticbackupsthatcanbeusedinsituationswherechanges
mayhavebeenmadebymistake.Thisfeaturealsoenablesyouto:
• Createaconfigurationrestorepointmanually.Thiscanbeusefultokeepabackupbeforeabig
configurationchange,ortocreateaknowngoodconfigurationthatcanberestoredtoatalater
point.
• Restoretoaconfigurationrestorepoint.Thiswillrestoretheconfigurationofthecontrollertothe
configurationithadwhentheconfigurationrestorepointwascreated.
ConfigurationrestorepointscanbefoundbygoingtoController > Files & Upgrades > Configuration &
Software Backup.Onthispagetherearetwotablesrelatedtoconfigurationrestorepoints:
• Configuration Restore Point Information: Thistableprovidesgeneralinformationabouthowthe
featureworks,suchashowmanyrestorepointswillbekept,thefrequencytheyarecreated,and
whichrestorepointswillbedeletedifthemaximumisreached.
• Configuration Restore Points: Thistableprovidesinformationabouttheactualrestorepoints.
Eachrowrepresentsarestorepoint,andprovidesinformationaboutwhenitwascreated,auser-
defineddescription,andifthespecificrestorepointcanbedeletedornot.
Notice: These restore points only keep a copy of the configuration of the controller, not the
software application. It is possible that restoring to a restore point from an older software version
could cause unexpected behavior. Please read the warnings and help in the wizard to ensure the
restore will restore what is expected.
20.5.6.1. Create configuration restore points
Configurationrestorepointswillbecreateddaily(ifanyconfigurationchangeshavebeenmade).Itisalso
possibletomanuallycreatearestorepoint.Tomanuallycreateaconfigurationrestorepoint:
1. GotoController > Files & Upgrades > Configuration & Software Backup.
2. OntheConfiguration Restore Points table,selectCreate Configuration Restore Point.
3. ReadthePreview,thenselectNext.
4.
EnterinaDescription andspecifytheDeletion Policy forthisrestorepoint,thenselectNext.
Notice: A maximum of five restore points can be marked as Never Delete. This should be
used to ensure important restore points will never get deleted when daily restore points are
created.
5. Reviewthedatayouenteredin,thenselectNext.
Page 204 0350058-J0 Rev AL

EnerSys Alpha Cordex CXC HP Specifications

General

Brand	EnerSys
Model	Alpha Cordex CXC HP
Category	Controller
Language	English