EasyManua.ls Logo

EnerSys Alpha Cordex CXC HP - Line Power Channels Import

EnerSys Alpha Cordex CXC HP
279 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cordex®CXCHPControllerSoftwareManual|8-Linepowersystems
1. GotoSystems > Line Power System > Layout.Atthetopofthetableusethedropdownlistto
selectanLinePowerload.WhenNone isselected,thechannelsthatarenotassignedtoaload
displayashighlighted.
2. Selectaloadfromthedropdownlist.Thechannelsassignedtothisloadwillbehighlighted.
3. Toaddanewchanneltotheload,selectit.Thechannelrectanglewillturnbluetoindicateitis
selected.
4.
Inthelayouttable,selectAssign Selected Channel(s) to Selected Load.Inthechanneldetails
table,theLine Power Load fieldwillbepopulatedwiththenameoftheload.
Bydefault,theAssign Selected Channel(s) to Selected Load andUnassign Selected
Channel(s) from Load buttonsaredisabledunlessaloadandchannelsareselected.
5. Tounassignachannelfromtheload,selectahighlightedchannel,andthenselectUnassign
Selected Channel(s) from Load.Inthechanneldetailstable,theLine Power Load fieldwillbe
setto“---”.
6. Toassignorunassignmultiplechannelsatonce,holdCTRL onthekeyboardandselectthe
requiredchannelswhichdisplayasbluewhenselected.
7. Onceallrequiredchannelsareselected,usetheAssign Selected Channel(s) to Selected Load
orUnassign Selected Channel(s) from Load buttonstoassignandunassignmultiplechannels.
8.8. Line power channels import
Thelinepowerchannelimportprovidestheabilitytomaplinepowerchannelstolinepowerloadswhich
arecreatedonimportforalinepowersystem.Thisisachievedusingacommaseparatedvalues(CSV)
filewhichisfilledinbytheuser.
Theimportwillautomaticallyremovepre-existinglinepowerloadsandchannelassignmentsifthe
providedimportfileisvalid.Afterremoval,newlycreatedinventoryandconfigurationisaddedbasedon
thefilebeingimported.
TheExport line power channels sectionwilldescribehowtogetstarted.
Page 120 0350058-J0 Rev AL

Table of Contents

Other manuals for EnerSys Alpha Cordex CXC HP