EnerSys Alpha Cordex CXC HP - Configure a Change Field to Constant Action

Cordex®CXCHPControllerSoftwareManual|22-Usingcustomviews,data,timers,counters,scheduler,andcustomactions
AChange Relay Action hasfourconfigurationfields:
• Name: Theeditablenameforthisitem.
• Description: Additionalinformationtodescribethisitem.
• Relay To Change: Therelaythatwillbechangingbasedonthespecifiedcondition.
• Condition: Abooleanfieldthatwillcontroltherelay.
Therearealsofieldsthatdescribethestateoftheaction:
• Field Value When Condition True: WhatstatetherelaywillbeinwhenCondition Value istrue.
• Field Value When Condition False Or ---: WhatstatetherelaywillbeinwhenCondition Value is
falseorunknown.
• Condition Value: ThepresentvalueofCondition.
• Field Value: ThepresentvalueofRelay To Change.
Change relay action operation
TheChange Relay actionoperatesasfollows:
• WhentheCondition Value isfalseorunknown,therelaywillbeinitsnormalstate.
• WhentheCondition Value istrue,therelaywillbeinitsabnormalstate.
22.9.2. Configure a change field to constant action
TheChange Field To Constant Action featurecanbeusedtochangethevalueofafieldbasedon
specificsituations.Thiscanbeusefultocontrolthestateofthesystembasedonexternalconditions.For
example,whenageneratorison,thesystemcanbesettochargethebatteriesatalowerratesothatit
doesnotdrainthegenerator.
ToaccessthisfeaturegotoController > Programmability > Custom Data.
AChange Field To Constant actionhassixconfigurationfields:
• Name: Theeditalenameofthisitem.
• Description: Additionalinformationtodescribethisitem.
• Field To Change: Thefieldthatwillbechangingbasedonthespecifiedcondition.
• Condition: AbooleanfieldthatwillcauseField To Change tochangetodifferentvalues.
• Field Value When Condition True: ThevalueofField To Change whenCondition Value istrue.
• Field Value When Condition False Or ---: ThevalueofField To Change whenCondition Value
isfalseorunknown.
Therearealsofieldsthatdescribethestateoftheaction:
Page 252 0350058-J0 Rev AL