EasyManuals Logo

EnerSys Alpha Cordex CXC HP User Manual

EnerSys Alpha Cordex CXC HP
279 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #214 background imageLoading...
Page #214 background image
Cordex®CXCHPControllerSoftwareManual|20-Maintainingthecontroller
Notice: The use of some non-latin characters may reduce the maximum allowable password
length.
20.6.8. Machine user
Inadditiontotheregularusersmentionedinaprevioussection,thereisalsoa"machine"user.Thisuser
isnotshownontheUsers page.Thisuserisnotusedbyaperson,butratherisusedtoallowexternal
softwaretointeractwiththecontroller.Bydefault,the"machine"userisdisabled.Thiscanbeseenby
lookingattheMachine Account Status tableontheUsers page.The"machine"userwillonlyever
becomeenabledifauserprovidesexternalsoftwareauthorizationtoperformoperationsonthiscontroller.
Thisauthorizationprocessisdoneintheexternalsoftware,andusesthesameauthenticationmechanism
asnormalloginsviathewebinterface.
Whenexternalsoftwareperformsoperationsonacontroller,eventlogentriescanbeseenshowingthe
"machine"userloggingin,aswellaswhichexternalsoftwareisperformingtheoperations,andwho
initiatedthem.
Whenthe"machine"userisenabled,thatauthorizationcanberevokedby:
1. GotoController > Users & Security > Users
2.
IntheMachine Account Status table,selectDisable Machine Account,andselectYes
Theexternalsoftwarewillnolongerbeabletousethe"machine"usertoperformoperationson
thiscontroller.
20.6.9. Remote configuration lockout
TheRemote Configuration Lockout featureallowsforacompletelockoutofconfigurationchanges
fromthewebinterface.Whenthisfeatureisactive,nouser,regardlessofpermissionlevel,willbeableto
changeormodifytheconfigurationviathewebinterface.Configurationchangeswillstillbepossiblevia
theLCD.
To enable this feature:
1. OntheLCD,gotoMaintenance > Remote Configuration Lockout.
2. SelecttheEDIT buttonbesideRemove Configuration Lockout,changethevaluetoDisabled
(logginginifrequired),thensave.
3. SelecttheEDIT buttonbesideLockout Override Time,enterinthedesiredtimetooverridethe
lockout(moreontheoverrideinthefollowingsections),thensave.
AftertheRemote Configuration Lockout featureisenabled,noconfigurationchangeswillbeallowed
fromthewebinterface.
0350058-J0 Rev AL Page 213

Table of Contents

Other manuals for EnerSys Alpha Cordex CXC HP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EnerSys Alpha Cordex CXC HP and is the answer not in the manual?

EnerSys Alpha Cordex CXC HP Specifications

General IconGeneral
BrandEnerSys
ModelAlpha Cordex CXC HP
CategoryController
LanguageEnglish