Fujitsu PRIMERGY RX300 S7 - Installing 2.5-Inch HDD; SSD Modules; Required Tools; Preliminary Steps

RX300 S7 Upgrade and Maintenance Manual 151
Hard disk drives / solid state drives
7.3.2 Installing 2.5-inch HDD / SSD modules
7.3.2.1 Required tools
● Preliminary and concluding steps: tool-less
● Installing a 2.5-inch HDD / SSD module: tool-less
7.3.2.2 Preliminary steps
Perform the following procedures:
Ê "Opening the rack door" on page 64
Ê Locate the correct drive bay as described in section "Mounting order for 2.5-
inch HDDs / SSDs" on page 146.
Customer Replaceable Units (CRU)
Average task duration: 5 minutes