286 Upgrade and Maintenance Manual
RX300 S7
Main memory
Figure 146: Removing memory modules (B)
Ê Remove the ejected memory module.
10.3.4 Concluding steps
Perform the following procedures:
Ê "Installing the air duct" on page 74
Ê "Mounting the server cover" on page 76
Ê "Sliding the server into the rack" on page 80
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 77.
Ê "Connecting the server to the power source" on page 81
Ê "Updating or recovering the system board BIOS and iRMC" on page 92
Ê "Enabling SVOM boot watchdog functionality" on page 101
Ê "Enabling BitLocker functionality" on page 107
To Next Page
Loading...
