Fujitsu PRIMERGY RX300 S7 - Removing the Front LAN Board

RX300 S7 Upgrade and Maintenance Manual 437
Front panel
Ê "Removing the fan box" on page 183
13.3.2.3 Removing the front LAN board
Figure 272: Disconnecting the front LAN board
Ê Disconnect the front LAN board from the system board:
Press in on the locking latch on the front LAN board holder (1) and pull the
front LAN board out of its socket (2).
Ê Remove the front panel connector see "Removing the front panel module"
on page 418.