Fujitsu PRIMERGY RX300 S7 - Configuration 4 to Configuration 7

520 Upgrade and Maintenance Manual RX300 S7
Conversion configurations
15.3.5 Configuration 4 to configuration 7
Figure 339: Removing the HDD cages and HDD dummy cover
Ê Remove the HDD cage and the HDD dummy.
Ê Remove the 4x 2.5-inch HDD backplanes from the HDD cages see section
"Removing the 4x 2.5-inch SAS HDD backplane" on page 167.
Figure 340: Installing the HDD cages