460 Upgrade and Maintenance Manual
RX300 S7
System board and components
14.2.1.5 Software configuration
The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Switch on the server.
Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
14.2.2 Removing the UFM board
14.2.2.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Removing the UFM:
– Phillips PH0 / (+) No. 0 screw driver
Field Replaceable Units (FRU)
Average task duration: 5 minutes
To Next Page
Loading...
