RX300 S7
Upgrade and Maintenance Manual 413
Front panel
13.1.4 Installing the front panel module
Ê If the front VGA connection is to be installed in the new front panel module,
install the front VGA cable as described in section "Installing the front VGA
connector" on page 417.
Ê If the front LAN connection is to be installed in the new front panel module,
install the front LAN cable as described in section "Installing the front LAN
connector" on page 426.
Figure 251: Connecting the front panel cable to the front panel module
Ê Connect the front panel cable to the new front panel module as shown.
To Next Page
Loading...
