RX300 S7
Upgrade and Maintenance Manual 407
13 Front panel
This chapter provides information on how to replace the front panel module and
optional front LAN connector board.
Safety notes
V CAUTION!
●
When inserting the front panel module into the server, ensure not to
pinch or strain any connected cables.
●
Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
●
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
●
For further information, please refer to chapter "Important
information" on page 43.
To Next Page
Loading...
