Fujitsu PRIMERGY RX300 S7 - Removing the Defective LTO Drive; Installing the New LTO Drive; Concluding Steps

RX300 S7 Upgrade and Maintenance Manual 405
Accessible drives
12.16.3 Removing the defective LTO drive
Ê "Removing the drive cage" on page 396
Ê "Removing an LTO drive out of the cage" on page 399
12.16.4 Installing the new LTO drive
Ê "Installing an LTO drive in the cage" on page 389
Ê "Installing the LTO cage" on page 392
12.16.5 Concluding steps
Perform the following procedures:
Ê "Installing the fan box" on page 184
Ê "Installing the air duct" on page 74
Ê "Installing the front cover" on page 505
Ê "Mounting the server cover" on page 76
Ê "Sliding the server into the rack" on page 80
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 77.
Ê "Connecting the server to the power source" on page 81
Ê "Closing the rack door" on page 84
Ê "Verifying and configuring the backup software solution" on page 98
Ê "Enabling BitLocker functionality" on page 107