338 Upgrade and Maintenance Manual
RX300 S7
Accessible drives
Ê "Removing the server cover" on page 72
Ê "Removing the air duct" on page 73
Ê "Removing the fan box" on page 183
12.2.3 Removing the LSD dummy cover
Figure 189: Removing the LSD dummy cover
Ê Take the LSD dummy cover plate by the two recessed grips and pull out the
LSD dummy cover plate.
V CAUTION!
Save the LSD dummy cover plate for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
To Next Page
Loading...
