RX300 S7
Upgrade and Maintenance Manual 385
Accessible drives
12.14 Installing an LTO drive in 2.5-inch version
12.14.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Installing accessible drives:
– Phillips PH2 / (+) No. 2 screw driver
12.14.2 Preliminary steps
Perform the following procedures:
Ê "Disabling BitLocker functionality" on page 85
Ê "Opening the rack door" on page 64
Ê "Locating the defective server" on page 56
Ê "Shutting down the server" on page 65
Ê "Disconnecting power cords" on page 66
Ê "Extending the server out of the rack" on page 69
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page 70.
Ê "Removing the server cover" on page 72
Ê "Removing the front cover" on page 501
Ê "Removing the air duct" on page 73
Ê "Removing the fan box" on page 183
Upgrade and Repair Units (URU)
Average task duration: 10 minutes
To Next Page
Loading...
