350 Upgrade and Maintenance Manual
RX300 S7
Accessible drives
12.5.5 Installing an ODD
Figure 200: Installing the ODD
Ê Run the SATA and power cables through the ODD bay opening as shown.
Ê Connect the SATA cable to the ODD (1).
Ê Connect the power cable to the ODD (2)
Ê Insert the ODD into the bay and push in until it locks in place (3).
12.5.6 Concluding steps
Perform the following procedures:
Ê "Installing the fan box" on page 184
Ê "Installing the air duct" on page 74
Ê "Mounting the server cover" on page 76
Ê "Sliding the server into the rack" on page 80
To Next Page
Loading...
