Fujitsu PRIMERGY RX300 S7 - Configuration Tables; Hard Disk Drives; Solid State Drives Mounting Order; Memory Board Configuration Table; Expansion Card Configuration Table

RX300 S7 Upgrade and Maintenance Manual 545
Appendix
17.2 Configuration tables
17.2.1 Hard disk drives / solid state drives mounting order
Please refer to chapter "Hard disk drives / solid state drives" on page 137.
17.2.2 Memory board configuration table
Please refer to chapter "Main memory" on page 271.
17.2.3 Expansion card configuration table
Please refer to chapter "Expansion cards and backup units" on page 187.
Pos. Component
1 Power Supply
2 Processor / CPU heat sink
3 TPM board
4 Fans
5 Front panel module bay
6 HDD / SSD drive bay
7 UFM board
8 Memory slots