RX300 S7
Upgrade and Maintenance Manual 525
16 Cables
This chapter provides information on how to connect, disconnect and route
cables.
Safety notes
V CAUTION!
●
Always hold cables by their connectors when disconnecting them.
Never pull on the cable to disconnect cables.
●
Ensure that none of the cables are scraped, strained or otherwise
damaged while replacing system components.
●
Immediately replace cables with damaged shielding.
●
Always use shielded network cables.
In this chapter
●
"Cables overview" on page 525
●
"Cabling" on page 528
16.1 Cables overview
No Name
Cable
number
Routing
Configuration
12345678
C1
LTG PWR
SB 150
T26139-
Y3758-V10
from power
backplane to
system board
oooooooo
C2
LTG SMB
PWR-BP
T26139-
Y4027-V2
from power
backplane to
system board
oooooooo
C3
LTG PWR
SAS-BP
3.5
T26139-
Y3939-V501
6x 3.5-inch SAS
BP to system
board
o
Table 10: List of used cables
To Next Page
Loading...
